For this assignment, you are to use the reading materials and any additional resources you find helpful to provide a design for your physical Cisco-based WLAN infrastructure. Y

For this assignment, you are to use the reading materials and any additional resources you find helpful to provide a design for your physical Cisco-based WLAN infrastructure. You are required to provide a written description and a diagram that describes your physical topology.

To prepare and gather requirements for the WLAN physical design, do the following:

•Complete the required reading material.

•Research this topic and include at least three references from articles, books, or Web sites to support your paper.

•Assume that the facility is up and running with everything you need to install and configure the network devices.

Your completed physical design plan should include the following:

•Design a WLAN physical topology that is appropriate for your specific organization. Your discussion and design should correlate with the organization description that you provided last week.

•Create a WLAN diagram that displays a site plan from a physical design perspective. Include design components relative to topology, device selection, and placement choices.

•Write an analysis of your WLAN infrastructure design, providing appropriate rationale for the chosen topology and device placement.

•Place RF components in the diagram and discuss the role that RF system components play in the overall communication of the WLAN infrastructure.

•Describe the signal transmission choices for your wireless environments and include information relevant to the type of modulation that you plan to use. The decision to use either spectrum or multiplexing should be supported.

•Describe appropriate device and infrastructure configuration activities that contributed to finding an appropriate solution for the WLAN physical design.

•Describe appropriate device and infrastructure configuration troubleshooting activities that aided in designing an appropriate solution for the WLAN physical design.

Make sure that your paper is professionally written, free of errors, and that APA formatting is applied throughout.

Once complete, submit your plan to the assignment area.