Type of structure which can be built on the chosen site in relation to the building code
Question: Revise each word, then explain elaborately, refrain using same word form the information, just use the information as an idea.
II. OBJECTIVES OF THE REPORT AND ITS SIGNIFICANCE PART 1:
Determine the type of structure which can be built on the chosen site in relation to the building code – The structure type has to be figured in order to know what building code requirements must comply. It will be narrowed down to what purpose it will have to function. There are structures and services thar doesn’t need the building consent anymore, and there are some who needs more requirements than the other. This is why it is only necessary to identify first what is the type of structure to be built.
Describe the requirements of the building code and relevant clauses with reference to the chosen site – For ever legislation and codes, necessary provisions are set. This varies accordingly to the conditions occurring. For every case, a fitting clause is set. It is important to be aware of the requirements and what are the clauses relevant to the said project in order to comply with them fully.
Identify the implications the building code clauses might have for the given structure- To understand what every clause signifies, it is only right to identify its implications and its relevance with the structure.
PART 2: Detailed Structure
4. Identify the zone requirements for the given new-build design and create table of preliminary data.- Zone requirements vary in accordance with the location. This is due to the varying factors needed to be considered. It is important to take note of the zone requirements before the design period to prevent lots of revisions.
5. Recommend and describe a foundation system for the new-build design based on the chosen site and show its suitability. – Foundation sets the structure’s base of strength. A quality-made foundation makes its structure durable and last long. It is only valid to determine a fitting foundation system that will suffice the design of structure.
6. Determine and describe the design aspects of a suspended particle board timber flooring for the new-build design – For the design, alternatives and other options should be in bay in any case it will be needed.
7. Describe other alternative construction method to be used on the chosen site and describe its response to environmental and sustainability legislation for the given scenario
Alternatives are considered if they have complied with the legislation and protocols. Looking deeper with other options may actually help the project.
8. Determine the type of structure which can be built on the chosen site in relation to
the building code
a. This is in accordance with the building code, Schedule 1, Clause A1, Classified uses, Clause 2.0.2. This will explain and give points of what structure will be built as described in the given architectural plans. There are 7 categories of buildings and are categorized according to its types. Each was classified relative to its intended purpose as defined in the Act.
b. As per the Building Code – Schedule 1 (Building Regulations, 1992), the residential structures can either be housing or communal. The purpose of housing is that it applies to buildings that has the intent of personal usage and with internal management. On the other hand, communal residential pertains to usage of groups and is extended to principal users. From the floor plan, elevation attached and herewith this assessment, the type of structure to be constructed is deemed to be housing- detached dwellings. This meant that the structure will cater a group of people or a household fewer than 6 people.
9. Proof of Ownership
The “proof of ownership” needs to be recent, or no older than three months. The Certificate of Title is preferred.
10. Architectural Plans
These are the blueprints or illustrations that comes with the proposal. They convey a building’s projected construction, alterations, removal, or demolition.
Skillfully created drawings with suitable dimensions and uniform page sizes should be used for a single collection of project drawings.
All sketches must include a drawing description that includes the names of the designer and project owner, an appropriate drawing number that follows a logical order, the project location, and a date for content management. Elevations, Sections, and Details must all be labeled and, as necessary, cross- and back-referenced.
11. Architectural Specifications
According to the Building Act’s concept of plans and specifications, a specification defines how a building is to be built, amended, torn down, or dismantled.
A specification is a thorough explanation of the measurements, design, materials, and services that will be employed. A designer, architect, engineer, or other appropriately trained individual should draft the acceptable standards of workmanship accomplished or to be completed.
12. Structural Plans and Specifications
These are structural plans or drawings that go along with an application and show how a structure is intended to be built, changed, destroyed, or removed. Together with the plans, is the inclusion of its specifications. A good specification won’t just list possible alternatives or generalizations; it will be site-specific. The specification must be accurate, thorough, straightforward, and precise. It must deliver facts in a clear, logical order without duplication or extraneous details. Along with saving time and money throughout the approval and construction processes, it also helps to preserve the caliber of the detailed craftsmanship. Importantly, information needs to be coordinated and consistent throughout different portions of the specification as well as with the supplementary drawings.
13. Clause A. General Provisions
. The various building types that must adhere to the building code are described in this section. These consist of: Housing, communal residential, commercial, industrial, outbuildings and ancillary. In this report is the applied and classical usage for residential dwellings
14. Clause B: Stability
The needs of a building’s load are covered in this section, with a focus on keeping people and
other structures safe under all anticipated stressors (such as temperature fluctuations, wind, impact, and shrinkage and gravity pressure over time). A building must consider how its intended usage would affect its stability over time as well as what would happen if the building failed.
15. Clause C: Protection from fire
This clause is divided into many components, all of which aim to prevent injuries to persons, damage to nearby buildings and properties, and obstruction of any required firefighting and rescue activities.
16. Clause D: Access
This section covers how everyone, including those with impairments, will be able to enter and exit the building securely on a daily basis while avoiding confrontations with oncoming traffic. Ramps, lifts, escalators, and stairs are important factors to take into account.
17. Clause E: Moisture
Three forms of moisture are discussed in this section. One is surface water, which must be
carefully removed in order to protect people and property. Effective drainage systems both inside and out should be installed. The next issue is external moisture, which involves making sure that outside moisture does not harm the structure or enter it to do so. Last but not least, buildings must have the necessary safeguards in place to prevent interior moisture from leading to mould growth, water spilling and damaging the structure or endangering occupants, and any other harm that internal moisture may result in.
18. Clause F: Safety of Users
This covers vast factors such as hazardous agents on site, hazardous building materials, hazardous substances and processes, safety from falling, construction and demolition hazards, visibility in escape routes, warning systems, signs and restricting access to residential pools.
19. Clause G: Services and Facilities
This highlights vast coverage for services such as personal hygiene, laundering, food and
preparation and prevention of contamination, ventilation, interior environment, airborne and impact sound, natural light, artificial light, electricity, piped services, gas as an energy source, water supplies, foul water, industrial liquid waste, and solid waste
20. Clause H: Energy Efficiency
In terms of heating and cooling, ventilation, water heating, and artificial lighting, this section explains how buildings must be constructed to be reasonably energy efficient. This may be done by employing a building envelope that offers insulation and properly regulates airflow, installing energy- efficient fixtures and appliances, taking into account the environment’s size and usage, and evaluating how the surrounding natural environment can help with building operations.
Collepals.com Plagiarism Free Papers
Are you looking for custom essay writing service or even dissertation writing services? Just request for our write my paper service, and we'll match you with the best essay writer in your subject! With an exceptional team of professional academic experts in a wide range of subjects, we can guarantee you an unrivaled quality of custom-written papers.
Get ZERO PLAGIARISM, HUMAN WRITTEN ESSAYS
Why Hire Collepals.com writers to do your paper?
Quality- We are experienced and have access to ample research materials.
We write plagiarism Free Content
Confidential- We never share or sell your personal information to third parties.
Support-Chat with us today! We are always waiting to answer all your questions.
