Read the file CC6740HW, below. This is a defensive company o
Read the file CC6740HW, below. This is a defensive company operation order. You will reference this order to write your platoon operation order. You may also refer to the OSMEAC Guide as well as CC6740REQA, Platoon in the Defense, found below in your Supplemental Readings, to help with some of the finer details of your order. The map is 1:25,000 digital map of the AOR. You may use the map or some other media to show your work, but you must show your work using the correct operational terms and graphics. Annex A: Platoon Defensive OpOrd exampleMission Statement: 1st Platoon, you are the company ME. NLT 28AUG1200R2009, block theenemy platoon south, in the vicinity of the Rawah Bridge, in order to prevent the enemy frominterfering with the Bn ME attack to the north.Example Defensive Scheme of Maneuver:On order, we will conduct a platoon battle position in the vicinity of Hill 265 with one maineffort and four supporting efforts. The defense will be oriented to the northeast. The ME willoccupy the center of the battle position, SE 1 will occupy to the left of the main effort, while SE2 occupies to the right of the main effort. SE 3 and SE 4 will provide direct fire and obstaclesupport for the platoon battle position.The platoon will cross the Line of Departure in a platoon column. Order of movement will bethe Main Effort followed by SE 1, SE 3, SE 4, then SE 2. The platoon will pass throughCheckpoint 27 before consolidating in a 360 at the ORP. In the ORP, the ME will orient from10-2, SE 1 from 6-10, and SE 2 from 2-6, with 12 o’clock being our direction of movement. Inthe platoon ORP, SE 3 and SE 4 will remain in the center position of the 360. Departing from theORP, the leader’s reconnaissance patrol will conduct the reconnaissance in accordance with thepriorities stated in coordinating instructions. Upon the return of the leader’s recon, I will pass anyrefinements in the scheme of maneuver to the squad leaders. O/O the platoon will proceed to theSRP in a platoon column, with the ME followed by SE 3, SE4, SE 1, then SE 2. At the squadrelease point, the platoon will execute a combination of the Crow’s Foot and the Bent ‘L’ tooccupy the BP. Once beyond the SRP, the squads will execute individual Bent ‘L’s from left toright into their positions. The ME will occupy the primary positions first. Once the main effort isin position, SE 1, SE 2, and SE 3 will depart the SRP and will occupy. SE 4 will occupy lastbehind the ME. Upon occupation, all elements will stand- to. O/O squads will go to 25% securityand begin to execute priorities of work. O/O, SE 1 will provide the first patrol and SE 2 willprovide the first LP/OP. Once priorities of work begin, the ME’s first priority is construction oftheir primary positions. O/O, SE 4 will also commence the implementation of the obstacle plan.O/O, the platoon will execute stand-to within the BP. O/S, the platoon will fire its FPF. O/S, theleast engaged unit will occupy supplementary positions. The platoon will be prepared to occupyalternate positions.Example Fire Support Plan:The purpose of my fire support plan is to neutralize the enemy in Engagement Area Reaper inorder to prevent the enemy from interfering with Bn ME attack to the north. (In this example, 1stPlatoon has priority of fire from the company 60mm mortar section)I have four pre-planned targets:AE 5202 (UT 1234 5678). Suspected enemy avenue of approach. Suppress the enemy IOT turnthe enemy platoon towards Engagement Area Reaper. The LP/OP will be the observer and willcontact L 3/11 over the artillery conduct of fire net when the enemy’s lead elements cross triggerline red. L battery will fire HE/PD.AE 5203 (UT 1242 5657). Likely enemy overwatch position. Suppress the enemy IOT preventthe enemy from observing their approach into Engagement Area Reaper. The LP/OP will be theobserver and will contact the 81mm mortar section over the battalion mortar net when the enemyis spotted IVO of TRP 2. 81mm mortars will fire HE/PD.AE5204 (UT 1258 5795). Enemy avenue of approach into Engagement Area Reaper. Suppressthe enemy as they enter the engagement area IOT prevent the enemy’s effective command andcontrol during the engagement. I will be the primary observer and will contact the 81mm mortarPage 29 of 34section over the battalion mortar net when the enemy’s lead squad crosses trigger line white.81mm mortars will fire HE/VT.AE5205 (UT 1210 5605). Final Protective Fire. Neutralize enemy assault elements IOT preventthe enemy from assaulting through Engagement Area Reaper. I will be the primary observer andwill contact the company 60mm mortar section over the company tac net when the enemycrosses trigger line blue. Company 60mm mortars will fire HE/VT.Patrol leaders will submit a list of targets ISO their patrol routes to me during forward unitcoordination for approval prior to departure.Example Tasking Statements:1st Squad: You are the ME. NLT 1200, block the enemy south in the vicinity of the RawahBridge in order to prevent the enemy from interfering with the Bn ME attack to the north. Youhave one assault squad attached effective immediately.2d Squad: You are SE 1. NLT 1200 block the enemy south IVO of Rawah Bridge from the eastof 1st Squad IOT prevent the enemy from exploiting the eastern flank of the platoon’s maineffort. You will provide Marines for the first patrol to depart friendly line approximately 30minutes after occupation. BPT assume the mission of the main effort. BPT assume the role ofleast engaged unit.3d Squad: You are SE 2. NLT 1200 block the enemy south IVO Rawah Bridge from the west ofthe 1st Squad IOT allow the main effort to fix the enemy in Engagement Area Reaper. You willprovide Marines for the first LP/OP, which will be inserted during the leader’s recon. BPTassume the mission of the main effort. BPT assume the role of least engaged unit.MG Squad: You are SE 3 and in general support of the platoon. Refer to B3N4478 Machine GunEmploymentEngineer Team: You are SE 4. Utilizing wire and existing obstacles, turn the enemy intoEngagement Area Reaper IOT deny the enemy freedom of movement. Also, fix the enemy inEngagement Area Reaper IOT prevent them from closing with the platoon’s primary positions.Priority of obstacle construction goes to obstacles in the engagement area, obstacles forward ofthe engagement area, and then to supplementary wire and other dummy obstacles. Actively seekopportunities to employ existing obstacles into the plan to maximize our resources. Coordinatewith me throughout the course of the operation for security support during obstacle construction.Coordinating Instructions (Not an all-inclusive list):TimelineLeader’s Recon Patrol task organizationPriorities of Reconnaissance for Leader’sRecon Method for MarkingSquad Release PointSquad BPsCommand PostCasualty Collection PointEnemy Prisoner of War Collection PointLatrinePriorities of WorkSecurity PlanPatrol PlanObstacle PlanTarget Precedence Engagement CriteriaImmediate Action Drills- Actions on enemy contact during occupation- Actions on enemy contact during departure / re-entry of friendly lines by a patrol.Plan for employment of least engaged unitMOPP LevelROEPlatoon Insertion Plan (Air, trucks, AAVs, etc…)Platoon Extraction Plan (Air, trucks, AAVs, etc…)Lost Marine PlanMissing Marine PlanTactical Control Measures- Assembly Area- Tentative ORP- SRP- Tentative primary defensive position- TRPs (tentative)- Trigger Lines (tentative)- Etc… Annex B: Step-by-step how to create a fire plan sketchStep Action1Determine appropriate scale required for creation of your platoonfire plan sketch. This means determining the dimensions, in meters,of each box on your graph paper. (remember that the ratio of yourscale should grow as the FPS progress from FT to Sqd to Plt).2Ensure that you know the length of each squad battle position (paceit off to be exact) as well as the attitude of the position. This willallow you to be precise when you place it on the grid lines.(You can also use a GPS to get the 8-10-digit grid for each position,or the left and right most holes for the fire teams/squads sectors.This info can also be used to place the positions on the grid lines.)3Use the grid lines available to orient the grids north. Reference thesquad fire plan sketches and, based on the attitude and size (measureboth with a protractor), draw your ME and both SE squads’ primarypositions. Repeat for alternate and supplementary positions asnecessary.4 Draw and label the platoon CP. Your company commander mayneed this information later on.5Use the protractor to measure and draw each squad’s left and rightlimits (Magnetic Azimuths) using a dotted linePrimary Positions Alternate Positions Supplementary PositionsWrite the azimuth for each sector along its associated line6Use the protractor to draw:For Plt – MG PDFs and FPLs; do not include SAW PDFs (You maychoose to include some SAW PDFs based on theSAWs’ location in the defense and importance in the overall fireplan.)FPLs are depicted with a bold line for grazing fire; where grazingfire cannot be achieved, the dead space is shown by a thin line. FPLshave a magnetic azimuthFor Sqd – SAW and M203 PDFs for each fire team; SAW PDF hasmagnetic azimuthsM203 has magnetic azimuth and range to target/dead-space in metersWrite the azimuth for each PDF/FPL along its associated line7Annotate key terrain on the sketch (large fingers or draws, roads,steams and large amounts of dead space. Try not to clutter thesketch. Ensure the terrain matches what you see in front of you.(This portion falls under the art of developing the sketch. Try tobalance the need for detail with avoiding clutter/confusion on thesketch).Page 32 of 348Draw and number Target Reference Points (TRPs) and trigger linesAre TRPs recognizable?Do they make sense?Do all the Marines know their respective TRPs/trigger lines?9Annotate targets (maintain grids to targets on another piece of paper)ensure FPF target is drawn with boxes. Each box is labeled with anumber that corresponds to a gun on the gun-line. Annotate whetheror not the FPF has been registered.10Annotate obstacles. This includes both existing and reinforcingobstacles. (Maintain grids to obstacles on another sheet of paper; thisincludes early warning devices).11Draw Passage Points for patrols.Draw Check Points for patrols if applicable.Draw LP/OPs12 Complete the marginal information13Create a copy of the fire plan sketch. You will keep one and turn theother one over to your company commander. Ensure to update asrequired.PLATOON FIRE PLAN SKETCH CHECKLIST1. Significant terrain annotated on the sketch?a. Streams?b. High Ground?c. Trails?2. Left and Right Grids and Sector Limits for Squads (Magnetic Azimuths)a. Primary Positions?b. Alternate Positions?c. Supplementary Positions?3. Center Grid for the Squad position?4. Left and Right Grids and Sector Limits for the Platoon (Magnetic Azimuths)a. Primary Positions?b. Alternate Positions?c. Supplementary Positions?5. Center Grid for the Platoon positions?6. Final Protective Fires for MGs(Principle Direction of Fire – PDF, or Final Protective Line – FPL) and Rockets/ Missiles(Hot/ Cold Positions)a. SAW has magnetic azimuths?b. M240G has magnetic azimuths for PDF/FPL?i. Length of Dead Space annotated?ii. Have you attached copies of the Range Cards to the Sketch?iii. Do you have a copy of the Range Card at the CP?c. Mk153 hot/cold positions marked?i. Have you attached Range Cards to the sketch?ii. Do you have a copy of the Range Card at the CP?d. Vehicles/other attachments marked?i. Grids to positions?ii. Sectors of Fire/PDFs/FPLs marked?iii. Have you attached Range Cards to the sketch?iv. Do you have copies of the Range Cards at the CP?7. Target Reference Point (TRP) Grids and Descriptions?a. Are TRPs recognizable?b. Do they make sense?c. Marked in Additional Information?8. OP/LP positions marked?a. Grids?i. Primary?ii. Alt?9. Targets annotated on sketch?Grids to targets?FPLs noted for all fire support agencies (60mm, 81mm, Arty, NGF)10. Wire, Natural Obstacles, Claymores, Booby Traps, Trip Flares, etc.?a. Annotated on map in relation to terrain?b. Grid marked in marginal info?11. IS IT CURRENT?Is it updated for new additions to the defense?Have you changed the date/time group (DTG) to reflect the new changes? Name, Rank, Unit,and DTG on Margin?
Collepals.com Plagiarism Free Papers
Are you looking for custom essay writing service or even dissertation writing services? Just request for our write my paper service, and we'll match you with the best essay writer in your subject! With an exceptional team of professional academic experts in a wide range of subjects, we can guarantee you an unrivaled quality of custom-written papers.
Why Hire Collepals.com writers to do your paper?
Quality- We are experienced and have access to ample research materials.
We write plagiarism Free Content
Confidential- We never share or sell your personal information to third parties.
Support-Chat with us today! We are always waiting to answer all your questions.