Assignment: Hazardous Waste Management
Assignment: Hazardous Waste Management
Assignment: Hazardous Waste Management
Permalink: https://collepals.com/assignment-hazar…waste-management/
As a continuation of our course project due in Unit VIII (A Proposal for an Industrial and Hazardous Waste Treatment Facility), complete the next (sixth) section (solid waste treatment) of your proposal by following the instructions carefully, and then submit your continued draft of your proposal into Blackboard for grading.
Instructions:
1. Closely read the Required Reading assignment from Bahadori (2014) and the Unit Lesson within the Study Guide. 2. Open your proposal draft from Unit V and make any improvements to your draft using your professor’s feedback from the Unit V project assignment. 3. Open the Unit VI Study Guide, read the unit lesson, and then work with the embedded interactive model to decide what solid waste treatment equipment to include in your treatment process design.
MEE 5801, Industrial and Hazardous Waste Management 5
4. Continue from your Unit V Project and make your sixth level one heading titled “Solid Waste Treatment.” Describe the solid waste treatment equipment that you engineered into your treatment process (sludge dewatering equipment). Be sure and describe the relevance and anticipated reduction of related analytical concentrations within your industrial and hazardous waste treatment system as they correspond with each technology that you selected.
You are required to describe the equipment selection in at least one page.
Information about accessing the Blackboard Grading Rubric for this assignment is provided below.
As a continuation of our course project due in Unit VIII (A Proposal for an Industrial and Hazardous Waste Treatment Facility), complete the next (sixth) section (solid waste treatment) of your proposal by following the instructions carefully, and then submit your continued draft of your proposal into Blackboard for grading.
Instructions:
1. Closely read the Required Reading assignment from Bahadori (2014) and the Unit Lesson within the Study Guide. 2. Open your proposal draft from Unit V and make any improvements to your draft using your professor’s feedback from the Unit V project assignment. 3. Open the Unit VI Study Guide, read the unit lesson, and then work with the embedded interactive model to decide what solid waste treatment equipment to include in your treatment process design.
MEE 5801, Industrial and Hazardous Waste Management 5
4. Continue from your Unit V Project and make your sixth level one heading titled “Solid Waste Treatment.” Describe the solid waste treatment equipment that you engineered into your treatment process (sludge dewatering equipment). Be sure and describe the relevance and anticipated reduction of related analytical concentrations within your industrial and hazardous waste treatment system as they correspond with each technology that you selected.
You are required to describe the equipment selection in at least one page.
Information about accessing the Blackboard Grading Rubric for this assignment is provided below.
Unit VIII Course Project
As the final and complete step of our course project (a proposal for an industrial and hazardous waste treatment facility), complete the last (seventh) section (cake solids disposal) of your proposal by following the instructions carefully. Draft a one paragraph abstract (insert the abstract immediately following the title page), and then submit your final copy of your completed proposal into Blackboard for grading.
Instructions:
1. Closely read the Required Reading assignment from Bahadori (2014) and the Unit Lesson within the Study Guide. 2. Open your proposal draft from Unit VI and make any improvements to your draft using your professor’s feedback from the Unit VI project assignment. 3. Open the Unit VIII Study Guide, read the unit lesson, strongly consider reading the article referenced in the suggested reading section, and then consider your filter cake disposal strategies available to you and your client. 4. Continue with your Unit VI Project and make your seventh level one heading titled “Cake Solids Disposal.” Describe the waste profiling process, the process of locating an appropriate site of final disposition for the filter cake, contracting with a landfill, and the paperwork associated with final disposal. You are required to describe the entire filter cake disposal process in at least one page. 5. Throughout the course you have continued to add pieces to the course project. After you have added the “Cake Solids Disposal” component to the project, review your project to be sure you have included all components from the course and incorporated feedback from the instructor. Along with the title page and reference list, create a one paragraph abstract following the title page that summarizes the entire project.
Unit VIII Course Project
As the final and complete step of our course project (a proposal for an industrial and hazardous waste treatment facility), complete the last (seventh) section (cake solids disposal) of your proposal by following the instructions carefully. Draft a one paragraph abstract (insert the abstract immediately following the title page), and then submit your final copy of your completed proposal into Blackboard for grading.
Instructions:
1. Closely read the Required Reading assignment from Bahadori (2014) and the Unit Lesson within the Study Guide. 2. Open your proposal draft from Unit VI and make any improvements to your draft using your professor’s feedback from the Unit VI project assignment. 3. Open the Unit VIII Study Guide, read the unit lesson, strongly consider reading the article referenced in the suggested reading section, and then consider your filter cake disposal strategies available to you and your client. 4. Continue with your Unit VI Project and make your seventh level one heading titled “Cake Solids Disposal.” Describe the waste profiling process, the process of locating an appropriate site of final disposition for the filter cake, contracting with a landfill, and the paperwork associated with final disposal. You are required to describe the entire filter cake disposal process in at least one page. 5. Throughout the course you have continued to add pieces to the course project. After you have added the “Cake Solids Disposal” component to the project, review your project to be sure you have included all components from the course and incorporated feedback from the instructor. Along with the title page and reference list, create a one paragraph abstract following the title page that summarizes the entire project.
Collepals.com Plagiarism Free Papers
Are you looking for custom essay writing service or even dissertation writing services? Just request for our write my paper service, and we'll match you with the best essay writer in your subject! With an exceptional team of professional academic experts in a wide range of subjects, we can guarantee you an unrivaled quality of custom-written papers.
Get ZERO PLAGIARISM, HUMAN WRITTEN ESSAYS
Why Hire Collepals.com writers to do your paper?
Quality- We are experienced and have access to ample research materials.
We write plagiarism Free Content
Confidential- We never share or sell your personal information to third parties.
Support-Chat with us today! We are always waiting to answer all your questions.