Steps can you suggest to control the hazards
What was the primary cause of the incident?
Q2).What steps can you suggest to control the hazards?
solve this question from case study below.
Case Study Conveyor Belt Fatality
An 18-year-old male (the victim) died when his right arm became caught in the roller mechanism underneath a conveyor belt. He was pulled into the roller mechanism and suffered compressional asphyxia and blunt force injuries. The employer was a corporation that manufactured hardwood trim, stainvays, doors, mantels and moldings. The victim had worked for the employer two months in the cutting room as a chop saw operator. His job was to chop out knots and other imperfections, to cut rough lumber to the desired lengths, and to clean up scrap wood by loading it onto the flat portion of the conveyor, which ran the length of the building.
On the day of the incident, the victim began his 10-hour shift at 4:30 p.m. He had been working approximately seven and a half hours when the incident occurred. His work station was approximately 150 feet away from the portion of the conveyor involved in the incident, but he had left his work station because he was caught up. After 5-10 minutes had elapsed, his supervisor began to look for him.
The supervisor finally located the victim, entangled in the inclined portion of the conveyor belt. The victim’s right arm, up to the shoulder, had been pulled into the roller mechanism undemeath the belt at a point where the bottom of the roller was almost six feet above the floor (see Figure below). The supervisor, upon seeing the victim, immediately shut off power to the belt at a wall panel four feet beyond where the victim was entangled.
Since there were no eyewitnesses to this incident, it is not certain how the victim became caught. The roller mechanisms were too high to have caught him or his clothing (sleeveless shirt, jeans) as he walked by unless he jumped up or reached up. The victim was not wearing any gloves or other personal protective equipment (PPE). The conveyor belt was in constant operation when the plant was running so workers throughout the plant could place scraps on it at any time. It is possible that the victim might have been climbing up the conveyor belt and may have caught his hand in the roller from above. Coworkers reported having seen the victim riding the raised portion of the belt on previous occasions, and he had received written reprimands for this. It is also possible that he reached up as he was walking under the belt, catching his hand between the rollers. (Source: http://www.cdc.gov/niosh/face/stateface/ky/98ky044.html)
Collepals.com Plagiarism Free Papers
Are you looking for custom essay writing service or even dissertation writing services? Just request for our write my paper service, and we'll match you with the best essay writer in your subject! With an exceptional team of professional academic experts in a wide range of subjects, we can guarantee you an unrivaled quality of custom-written papers.
Get ZERO PLAGIARISM, HUMAN WRITTEN ESSAYS
Why Hire Collepals.com writers to do your paper?
Quality- We are experienced and have access to ample research materials.
We write plagiarism Free Content
Confidential- We never share or sell your personal information to third parties.
Support-Chat with us today! We are always waiting to answer all your questions.
